How to Remove a Toilet Paper Holder

Small fittings, such as a towel rail, shower basket, toilet paper holder, or soap dispenser, are some of the important items that complete our bathrooms and make them more comfortable. However, it is important to check things from time to time to avoid any trouble later on. One can easily change the outdated model of the toilet paper holder and update it with a new one.

Usually, the toilet papers are held in place with proper screws. To lose the screws, you need to use a screwdriver or a small Allen wrench. However, some toilet paper holders are glued to the wall, i.e., ceramic holders. To remove such holders, you need to cut the adhesive using an oscillating tool.

Removing a Toilet Paper Holder without Screws

If you’re preparing to paint or wallpaper your washroom dividers, eliminating the bathroom tissue holder will make the job more straightforward. You might even need to supplant the holder with another one that better supplements the new stylistic layout.

While removing a holder without set screws, the first and the most important job is to establish what kind of holder you have. After this, use the right set of tools. It includes a chisel, putty knife, hammer, and an electric rotator cutter. Once you get all these tools, the next thing is to follow the below-listed steps one by one.

Step 1 – Get Rid of the Grout

The ceramic holders are usually installed on a tiled wall. It is important to properly remove the grout using a putty knife before removing a paper holder. Make sure you do not damage the adjacent tiles.

Step 2 – Cut the Toilet Paper Holder

Always wear protective equipment and use an electric rotary cutter to cut the ceramic holder in quarters or halves properly. Do not lose your temper during the process, as this entire task requires a lot of time and effort.

Step 3 – Remove the Holder Properly

Use hammer and chisel to remove the toilet paper holder piece correctly and tile adhesive as much as possible. Make sure you cannot make any gaps in the walls during the process. One can easily fill the gap by using a new tile and toilet paper holder.

In case the holder isn’t mounted with screws or stuck to the wall, it is held in place with an adaptable mounting bracket. Handle the holder with two hands. Push the holder up and pull out to release the top of the holder out of the section. Slide the holder downwards to eliminate it from the mounting section.

Removing a Glued Toilet Paper Holder

One can easily remove a glued toilet paper holder using the right tools. The toolset required in this step includes a putty knife, hammer, and a heat gun. After this, follow the below-listed steps one by one to complete the job properly.

Step 1 – Properly Heat the Adhesive

Toilet paper holders are properly glued to the wall using strong glue or adhesive padding. One can easily remove it with proper heat. Do not forget to wear the right protective types of equipment before using a heat gun. Properly heat the entire area of the holder. Evenly distribute the heat in all the corners to remove the holder.

Step 2 – Remove the Toilet Paper Holder

Once you complete the healing process, simply slide the tip of a putty knife between the wall and the toilet paper holder. Tap the handle of the holder by using a hammer. Apply force to bring the tool down and disconnect the holder.

How to Eradicate a Holder with Non-visible Screws

A toilet paper holder is not often thought about in anticipation that it is the moment to substitute it. This diminutive fixture is established adequately installed on, on the plane of tiled walls or vanities. Most of the holders are held in position with screws or adhesives. The toilet paper holders attached with glue acquire a little more time to eradicate, but using the correct tools isn’t that hard to eliminate an old toilet paper holder.

Here in this section, you will know the right way of removing a holder with non-visible screws. Check the guide below to complete the task.

Step 1 – Find the Screws

The first task is to examine the toilet paper holder. Properly locate the plate that covers up the screws. Simply pull the plate from the wall to disclose the fasteners.

Step 2 – Remove the Caulk

Once you find the screws, the next job is to remove the caulk. One can remove the grout or caulk by using a putty knife.

Step 3 – Unlock the Screws

Use a screwdriver to properly remove the screws so that you can easily pull the toilet paper holder. Once you remove the holder, replace it with a new one.

Recessed Toilet Paper Holder

Basic recessed bathroom tissue holders are screwed to studs and are eliminated by releasing the two noticeable screws. Assuming there are no noticeable screws, it is conceivable that your tissue holder could be stuck to the wall or held in place by a mounting section. A stuck on the recessed holder is eliminated by cutting the caulking around with a utility blade and prying it out.

On the off chance that the holder isn’t mounted with screws or stuck to the divider, it is held in place with an adaptable mounting section. Handle the holder with two hands. Push the holder up and pull out to set the top of the holder free from the bracket. Slide the holder downwards to eliminate it from the mounting section totally.

Fix the Holes Properly After Removing the Tissue Paper Holder

You’ll ordinarily be fixing openings in fiberglass, tile, or drywall since these are generally standard divider covers in bathrooms. Drywall openings are the simplest to set since you should scoop in some joint or spackling compound let it dry. Tile openings, then again, are inordinately challenging to cover totally, and the best you might be able to carry out is to fill them with epoxy paste and touch up with paint that matches the tile tone.

The filling job is performed by using a unique material. One can quickly get all the right tools to complete the job. If you do not have experience doing it, consider getting help from an expert. However, one can also do it on their own as there are many online videos available on the internet.

Conclusion

Eliminating a bathroom tissue holder without any screws isn’t difficult to perform, but it will cause more harm than removing one fastened with screws. Except if you’re giving your washroom a redesign, you must consider supplanting it with a similar sort of holder or a model huge enough to cover the damage.

Leave a Comment